Signalling & Telecommunications
Other
|
|
Control Command & Signalling Other
Signalling & Telecommunications Other |
|
Search for:
In:
|
| Doc No. | Issue Date | Issue No. | Document Title |
| BR13422 | February 1979 | 1 |
50Hz Single Phase AC Electrification Immunisation of Signalling and Telecommunications Systems Against Electrical Interference. |
| BR1654 | December 1986 | 2 |
Radio Electronic Token Block System |
| GT/EHH804 | March 1994 | 1 |
Closed Circuit Television for Driver Only Operation (Passenger) This document sets out the minimum mandatory standards for the provision of CCTV at locations where Driver Only Operation of Passenger Trains is employed. |
| GT/TDINT100 | September 1993 | 1 |
Earthing and Equipotential Bonding of Telecommunications Equipment This directive gives the general requirements of telecommunications earthing systems, and encompasses the requirements for the earthing and equipotential bonding of all telecommunications equipment to an earthing system. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| JDP C006 | October 1992 | 2 |
Class 140-165 Trains Not Fitted With Track Circuit Actuators |
| RIS 3082 | July 2007 | 1 |
Rail Industry Standard for GSM- R Cab Mobile, Great Britain Open
Interface Optional Requirements This document has been published by Rail Safety and Standards Board to set out voluntary technical requirements for cab mobile equipment used in conjunction with GSM-R systems on Network Rail controlled infrastructure. |
| SSP050 | June 1988 | 1 |
Remote Control Standby Arrangements Standard may be ordered individually or as part of the complete handbook. |
| TD CAB 018 | September 1991 | 2 |
Applied Voltage and Transmission Level Maxima for Balanced-pair Telecommunications Cables |
| TD GEN 096 | January 1992 | 1 |
Telecommunications Requirements for General and Emergency Use At Sub Surface Stations There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| TD INT 023 | December 1987 | 1 |
Protection of 2Mbits/s Pcm on Physical Pairs from High Induced Voltages This Directive details the measures necessary to minimise incidents of single or multiple regenerator failure when subject to high induced longitudinal voltage caused principally by either adjacent lighting strikes or electric traction supply faults. |
| TD RAD 054 | May 1992 | 1 |
Procedures for The Use of Band 111/nrn Base Stations for Engineering/Emergency Work |
|
Search for:
In:
|