Rolling Stock RT - Railway Group Standards
|
|
Withdrawn Documentation
Rolling Stock RT - Railway Group Standards |
|
Search for:
In:
|
| Withdrawn Doc No. | Issue Date | Issue No. | Withdrawn Document Title |
| GE/RT8270 Issue 1 | February 2003 | 1 |
Route Acceptance of Rail Vehicles including changes in Operation or Infrastructure This standard mandates requirements and responsibilities for the route acceptance of rail vehicles for operation on Railtrack controlled infrastructure necessitated by the introduction of a new vehicle, modification to an existing vehicle, change to the operation of the vehicle or change to the infrastructure. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GK/RT0091 | October 2000 | 2 |
Driver's Reminder Appliance Defines the requirements for the provision and functionality of Driver's Reminder Appliances in the driving cabs of trains, in order to reduce the risk of a train starting when the signal ahead is at danger. |
| GM/RT1000 | January 1997 | 1 |
Compatibility Between Electric Trains and Electrification Systems Process for managing change that affects the compatibility between electric trains and Railtrack's electrification systems. |
| GM/RT1001 | January 1995 | 1 |
Classic 750V d.c. 3rd Rail Electrification System and T&RS Parameters to Ensure Interworking This standard contains the parameters of the classic 750V d.c. 3rd rail electrification system and T&RS which are necessary for interworking. |
| GM/RT1006 | January 1995 | 1 |
Electrification Isolation Documents - Production and Modification This standard defines the requirements for the production and modification of isolation documents for all electrified lines. |
| GM/RT1010 | January 1998 | 1 |
Electrified Lines Traction Bonding This Standard mandates the requirements for electrified lines traction bonding to minimise the risk of electric shock from accessible and touch voltages and the risk of explosion from arcing when flammable gases and liquids are being transferred. |
| GM/RT1018 | January 1995 | 1 |
D.C. Traction-Stray Current and Cathodic Protection - Control of their Undesirable Effects This standard identifies some of the infrastructure elements which may be adversely affected by stray d.c. traction currents and cathodic protection and prescribes steps which shall be taken to avoid these adverse effects. |
| GM/RT1042 | January 1995 | 1 |
Requirements for the Operation of Steam Locomotives over A.C. Electrified Route This standard contains the requirements which shall be satisfied when approving the operation of steam powered locomotives over Railtracks A.C. electrified routes. |
| GM/RT1102 | January 1994 | 1 |
Electrical Power Supplies for Signalling Systems This Standard defines the requirements for the interface between the signalling engineer and the supply engineer with respect to the provision of electrical power supplies for signalling systems. The standard details the information to be provided by both the signalling engineer and the supply engineer for the design, safe operation and maintenance of electrical power supplies for signalling systems. |
| GM/RT1200 | January 1995 | 2 |
Railway Station Lift for Public Operation Gives guidance on the requirements for the installation of new or the refurbishment of existing lifts on Railway Stations where public operation is required. |
| GM/RT1200 | January 1994 | 1 |
Railway Station Lift for Public Operation Gives guidance on the requirements for the installation of new or the refurbishment of existing lifts on Railway Stations where public operation is required. |
| GM/RT1200 | January 1996 | 3 |
Railway Station Lift for Public Operation Gives guidance on the requirements for the installation of new or the refurbishment of existing lifts on Railway Stations where public operation is required. |
| GM/RT1310 | January 1996 | 1 |
Design Requirements and Acceptance of Portable/Transportable Infrastructure Plant and Equipment This Standard defines the minimum design requirements and the acceptance process for Portable/Transportable Infrastructure Plant and Equipment for use on Railrack controlled infrastructure in the area defined as On or Near the Line. It only addresses the particular risks associated with use of such Equipment on the railway. |
| GM/RT1416 | January 1995 | 1 |
Control, Safe Use and Operation of On-Track Machines A Standard detailing the requirements for the control, safe use and operation of on-track machines in the railway environment |
| GM/RT1424 | January 1995 | 1 |
Operation of On-Track Machines This Standard defines a notice to be displayed in On-Track Machines which details additional duties of PICOWS when working with On-Track Machines. |
| GM/RT2000 | January 1995 | 1 |
Engineering Acceptance of Rail Vehicles This Railway Group Standard defines the engineering acceptance process to enable rail vehicles to be registered to operate on Railtrack controlled infrastructure. |
| GM/RT2002 | January 1995 | 2 |
Acceptance Testing of Rail Vehicles This Railway Group Standard defines the essential elements of the acceptance testing process which should be completed before rail vehicles are allowed to operate on Railtrack controlled infrastructure. It also defines the requirements to minimise the risk when rail vehicles are subject to on-track testing as part of the process for the Engineering Acceptance of Rail Vehicles. |
| GM/RT2002 | January 1995 | 1 |
Acceptance Testing of Rail Vehicles This Railway Group Standard defines the essential elements of the acceptance testing process which should be completed before rail vehicles are allowed to operate on Railtrack controlled infrastructure. It also defines the requirements to minimise the risk when rail vehicles are subject to on-track testing as part of the process for the Engineering Acceptance of Rail Vehicles. |
| GM/RT2004 | January 1995 | 1 |
Rail Vehicle Maintenance and Overhaul Policy This document covers the requirements for rail vehicles accepted for operation on Railtrack lines to be maintained and overhauled in accordance with a declared Policy. |
| GM/RT2005 | January 1994 | 1 |
Certification Process for NDT Operatives, Equipment & Facilities Used for Inspecting T&RS |
| GM/RT2005 Issue 2 | December 1995 | 2 |
Certification Processes for NDT Operatives, Equipment & Facilities Used for Inspecting T&RS This standard specifies requirements for the certification of operatives and facilities used to undertake non-destructive testing of safety critical components fitted to railway vehicles operating on Railtrack's controlled infrastructure. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2020 | May 1994 | 1 |
Policy for The Engineering of Wheelsets Used on Railtrack Lines This document outlines the overall engineering policy to be applied to all wheelsets before and during the use on Railtrack lines. The policy covers the whole life of wheelsets, from the design of new wheelsets, through to the withdrawal of wheelsets at the end of a serviceable life. This overall policy document makes reference to a number of more detailed documents. These documents further define the particular policies and standards to be applied to a wheel set at the various stages of its life. |
| GM/RT2023 | September 1995 | 1 |
Wheelset Manufacture This Standard covers the requirements for the manufacture of wheelsets and wheelset components for rail vehicles operated on Railtrack controlled infrastructure. |
| GM/RT2025 | January 1995 | 1 |
Branding Wheels, Tyres and Axles This standard details the branding requirements for all wheels, tyres and axles used on rail vehicles operating on Railtrack controlled infrastructure. |
| GM/RT2025 | October 1996 | 2 |
Branding of Wheels, Tyres and Axles This standard details the branding requirements for all wheels, tyres and axles used on rail vehicles operating on Railtrack controlled infrastructure. |
| GM/RT2026 | July 1996 | 2 |
Wheelsets: In Service Safety and Maintenance Attention This document defines the requirements for the service maintenance examinations for all wheelsets fitted under vehicles operating on Railtrack lines (except those on foreign registered RIC/RIV vehicles working in International Traffic). |
| GM/RT2026 | January 1994 | 1 |
Wheelsets: In Service Safety and Maintenance Attention This document defines the requirements for the in service maintenance examinations for all wheelsets fitted under vehicles operating on Railtrack lines (except those on foreign registered RIC/RIV vehicles working in International Traffic). |
| GM/RT2027 | June 1994 | 1 |
Wheelsets Off-Vehicle Repair and Overhaul This document covers the engineering requirements for the off-vehicle repair and overhaul of wheelsets (except those on foreign registered RIC/RIV vehicles working in international Traffic), to enable their further safe use on vehicles operating on Railtrack lines. |
| GM/RT2028 | October 1998 | 1 |
Wheelset Design Wheelset design is fundamental to the safe operation of vehicles and it is the purpose of this document to control the risk from this activity for vehicles operating on Railtrack controlled infrastructure. |
| GM/RT2030 | February 1995 | 1 |
Axle Bearing Maintenance and Overhaul This standard defines the essential requirements for the maintenance and overhaul of axle bearings fitted to vehicles operating on Railtrack lines and specifies the criteria for the certification of staff employed to maintain and overhaul axle bearings. |
| GM/RT2041 | January 1996 | 1 |
Braking System and Performance for Trailer Coaching Stock Defines the performance requirements of the braking systems of trailer coaching stock together with the principal features that must be incorporated to enable safety of operation and interworking to take place. |
| GM/RT2042 | January 1996 | 1 |
Braking System and Performance for Traction Units Defines the performance requirements of the braking systems of Traction Units together with the principal features that shall be incorporated to enable safety of operation and interworking to take place. |
| GM/RT2044 | April 2000 | 3 |
Braking System Requirements and Performance for Multiple Units This standard defines the principles of operation and performance requirements for the braking systems of Multiple Units for operation on Railtrack controlled infrastructure, in order to ensure safety of operation and safety interworking. |
| GM/RT2044 | January 1997 | 2 |
Braking System and Performance for Multiple Units This standard defines the performance requirements of the braking systems of Multiple Units and sets out the principal features that must be incorporated to enable safety of operation and interworking to take place. |
| GM/RT2044 | January 1994 | 1 |
Braking System and Performance for Multiple Units This standard defines the performance requirements of the braking systems of Multiple Units and sets out the principle features that must be incorporated to ensure safety of operation and interworking. |
| GM/RT2045 | January 1998 | 1 |
Braking Principles for Rail Vehicles This Standard defines the principles of operation and performance requirements for the braking systems of rail vehicles for operation on Railtrack controlled infrastructure, in order to ensure safety and safe interworking. |
| GM/RT2100 | April 1997 | 2 |
Structural Requirements for Railway Vehicles This standard prescribes the proof and fatigue strength requirements for railway vehicles, including traction and rolling stock and on-track machines. Requirements for modes of structural collapse and energy absorption under collision conditions are defined. Areas covered include vehicle bodies and body-mounted components, obstacle deflectors and minimum axleloads, bogies and bogie-mounted equipments, lifeguards, and axlebox-mounted equipments. |
| GM/RT2100 | January 1994 | 1 |
Structural Requirements for Railway Vehicles This standard prescribes the proof and fatigue strength requirements for railway vehicles, including traction and rolling stock and on-track machines. Requirements for modes of structural collapse and energy absorption under collision conditions are defined. Areas covered include vehicle bodies and body-mounted components, obstacle deflectors and minimum axleloads, bogies and bogie-mounted equipments, lifeguards, and axlebox-mounted equipments. |
| GM/RT2102 | August 1994 | 1 |
Structural Requirements for Drawgear and Buffers on Railway Vehicles This standard prescribes the strength requirements for drawgear and buffers on railway vehicles. It covers both traction and rolling stock and on-track machines. |
| GM/RT2120 | August 1998 | 1 |
Requirements for the Control of Risks Arising from Fires on Railway Vehicles This Standard prescribes fire performance requirements for railway vehicles so as to minimise the risks that an on-board fire will pose to the safety of Railtrack's controlled infrastructure and to the users of that infrastructure. |
| GM/RT2120 Issue 2 | April 2004 | 2 |
Requirements for the Control of Risks Arising from Fires on Railway Vehicles This document mandates fire performance requirements for railway vehicles so as to minimise the risks that an onboard fire will pose to the safety of Network Rail controlled infrastructure and to the users of that infrastructure. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2125 | January 1996 | 1 |
Fire Performance Requirements for Railway Vehicles This standard prescribes Fire Performance requirements for railway vehicles that carry people, to ensure high resistance to the initiation of fire and its subsequent progression, so as to minimise risks to life. It covers the requirements for vehicle design and construction, testing, maintenance and cleaning, and all engineering changes that might affect fire behaviour and associated safety. |
| GM/RT2141 Issue 1 | February 1998 | 1 |
Resistance of Railway Vehicles to Derailment and Roll-Over This document prescribes design requirements for traction and rolling stock and for on-track plant to ensure acceptable resistance against flange climbing derailment and against roll-over induced by overspeeding. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2142 | June 1994 | 1 |
Resistance of Railway Vehicles to Overturning in Gales This standard prescribes design and maintenance requirements for railway vehicles to ensure acceptable resistance against overturning in extreme wind conditions. Safety criteria are related to vehicle aerodynamic shape, weight and mass distributions, suspension characteristics, train speed, routes of operation, and wind speed probabilities. |
| GM/RT2149 | August 1994 | 1 |
Kinematic Gauging Requirements for Railway Vehicles This standard prescribes maximum permissible vehicle dimensions for traction and rolling stock and for on-track machines, to ensure that safe and adequate clearances are provided and maintained between vehicles and track infrastructure and between vehicles passing each other. |
| GM/RT2149 Issue 2 | August 2000 | 2 |
Requirements for Defining and Maintaining the Size of Railway Vehicles This document sets out the methods of determining and the format of the prescribed parameters for defining the size of railway vehicles. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2160 | September 1994 | 1 |
Ride Vibration and Noise Environment Inside Railway Vehicles This standard prescribes maximum permitted levels for ride accelerations, internal noise and pressure pulses within traction and rolling stock vehicles and on-track machines, to ensure an acceptable working environment in which traincrew can carry out their operational duties safely. |
| GM/RT2160 Issue 2 | October 2000 | 2 |
Ride Vibration and Noise Environment Inside Railway Vehicles This standard prescribes maximum permitted levels for ride accelerations, internal noise and aerodynamic pressure pulses within traction and rolling stock vehicles and on-track machines, to ensure an acceptable working environment in which traincrew can carry out their operational duties safely. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2177 | January 1995 | 1 |
Emergency and Safety Equipment and Signs on Rail Vehicles This standard defines the essential emergency and safety equipment and signing for rail vehicles operating over Railtrack lines. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2180 | February 2000 | 3 |
Visibility and Audibility Requirements for Trains This document defines the requirements for visibility and audibility of approaching trains as perceived by people on or near the track. It defines the visibility requirements for trains being approached from the rear by other trains and it defines the requirements to enable train drivers to identify lineside warnings at night. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2180 Issue 1 | January 1995 | 1 |
Visibility and Audibility of Trains on the Track This standard defines the requirements for visibility and audibility of approaching trains as perceived by people on or near the track. It also defines the visibility requirements for trains being approached by other trains from the rear. |
| GM/RT2180 Issue 2 | January 1999 | 2 |
Visibility and Audibility Requirements for Trains This Standard defines the requirements for visibility and audibility of approaching trains as perceived by people on or near the track, it defines the visibility requirements for trains being approached from the rear by other trains and it defines the requirements to enable train drivers to Identify Iineside warnings at night. |
| GM/RT2181 | January 1995 | 1 |
Overhead Line Equipment (OLE) Warning Line on Traction and Rolling Stock This Railway Group Standard defines the requirements for the overhead line equipment (OLE) warning line to be applied to traction and rolling stock. |
| GM/RT2181 | January 1997 | 2 |
Overhead Line Equipment (OLE) Warning Line on Traction and Rolling Stock This Railway Group Standard defines the requirements for the overhead line equipment (OLE) warning line to be applied to traction and rolling stock. |
| GM/RT2182 | January 1994 | 1 |
Restricted Working of Railway Vehicles with Missing, Defective or Isolated Equipment Vehicle operators and infrastructure controllers shall have in place procedures to control strictly the operation of railway vehicles that have defective, missing or isolated equipment which may prejudice safety or safe interworking. |
| GM/RT2185 | January 1995 | 1 |
Train Safety Systems This Standard defines the requirements for train safety systems on traction and rolling stock, and specifies those that must interface with Railtrack track-based equipment. |
| GM/RT2190 | April 1998 | 1 |
Mechanical and Electrical Inter Vehicle Coupling Systems This document defines the mandatory requirements for inter-vehicle mechanical and electrical coupling systems to control the safety risks associated with accidents and incidents, train separation and maloperation of electrical circuits. |
| GM/RT2210 | January 1995 | 1 |
Identification of Rail Vehicles This Railway Group Standard mandates the system of numbering to be used to identify rail vehicles operating on Railtrack controlled infrastructure. |
| GM/RT2211 | January 1994 | 1 |
Mandatory Data for Rail Vehicles This standard mandates that up-to-date records of design and operational data essential for railway safety and interworking are maintained on the Rolling Stock Library database for all rail vehicles registered for operation on the railway network. Specific data fields are listed. |
| GM/RT2211 | March 1996 | 2 |
Registration of Rail Vehicles and Mandatory Data Requirements This standard mandates that up-to-date records of design and operational data essential for railway safety and interworking are maintained on the Rolling Stock Library database for all rail vehicles registered for operation on the railway network. Specific data fields are listed. |
| GM/RT2241 | January 1994 | 1 |
Safety Examinations for Rail Vehicles This Railway Group Standard sets out the requirements for safety examinations of rail vehicles to enable them to be operated safely on the railway network. |
| GM/RT2242 | April 1996 | 1 |
Risk Management of Rail Vehicle Axle Bearings This Railway Group Standard mandates that there shall be risk-based processes to minimise and detect failures of rail vehicle axle bearings. |
| GM/RT2243 | April 1996 | 1 |
Parameters For Hot Axlebox Detection Equipment This Railway Group Standard mandates parameters for equipment on rail vehicles and at the line side for detecting overheating axle bearings. |
| GM/RT2244 | January 1994 | 1 |
Maintenance of Rail Vehicle Compressed Air Systems This standard defines the maintenance requirements for Rail Vehicle control, brake and suspension systems that contain compressed air, to ensure safety of operation. |
| GM/RT2245 | January 1996 | 1 |
Safety Critical Work on Traction and Rolling Stock This Standard defines safety critical work in relation to traction and rolling stock and mandates competence and fitness requirements for people carrying out such work. |
| GM/RT2250 | July 1995 | 2 |
Safety Performance Monitoring and Defect Reporting of Rail Vehicles and Plant and Machinery This Railway Group Standard defines requirements for safety performance monitoring, reporting, recording, analysing and taking corrective action following safety related defects, incidents and accidents affecting rail vehicles and plant and machinery. |
| GM/RT2250 | January 1994 | 1 |
Safety Monitoring and Reporting of Accidents and Failures Affecting Rail Vehicles and Equipment This standard defines requirements for monitoring, reporting, recording, analysing and taking corrective action following safety related defects, incidents and accidents affecting rail vehicles and equipment. |
| GM/RT2260 | December 2003 | 2 |
Design for Recovery of Rail Vehicles This document mandates requirements for rail vehicle design to enable safe lifting, rerailing and removal from the running line after accidents and incidents. |
| GM/RT2260 | June 1995 | 1 |
Design for Recovery of Rail Vehicles After Accidents This Railway Group Standard mandates requirements in rail vehicle design to enable safe lifting and rerailing after accidents. |
| GM/RT2270 | January 1996 | 1 |
Speedometer Testing This document sets out the requirements for testing of speed indicating systems to support the safety of the railway. |
| GM/RT2272 | January 1994 | 1 |
Securing, Testing and Repairing Manually Operated Exterior Doors on Coaching Stock after Accident Train operators must have in place procedures for securing, testing and repairing manually operated exterior door lock systems on coaching stock after accidents. |
| GM/RT2273 | February 1999 | 1 |
Post Incident and Post Accident Testing of Vehicles This Standard sets out the general requirements for post incident and post accident testing and the particular requirements for brake tests, speed indicating systems and manually operated exterior doors on rail vehicles. |
| GM/RT2300 | August 1996 | 1 |
Warning Signs and Labels Fitted to Electrical Equipment on Rail Mounted Vehicles This Standard details the requirements for 'Danger: electricity' triangular warning signs and associated supplementary labels to be fitted to rail mounted vehicles. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2303 | January 1994 | 1 |
Electrical Interconnection of Traction and Rolling Stock This Standard defines the requirements for safe electrical interconnection of Traction and Rolling Stock vehicles which may be required to operate with their control system coupled in multiple, and/or with other electrical systems connected together, and for prevention of the interconnection of electrical systems which are not designed to be connected together. |
| GM/RT2304 | January 1995 | 1 |
Equipotential Bonding of Rail Vehicles to Running Rail Potential This standard defines the requirements for equipotential bonding of rail vehicles to comply with the Electricity at Work Regulations and to prevent danger arising from electrically charged exposed conductive parts. |
| GM/RT2304 | February 1998 | 2 |
Equipotential Bonding of Rail Vehicles to Running Rail Potential This standard defines the requirements for equipotential bonding of rail vehicles to comply with the Electricity at Work Regulations and to prevent danger arising from electrically charged exposed conductive parts. |
| GM/RT2451 | May 1999 | 1 |
Magnetic Partical Inspection This Railway Group Standard specifies the requirements that are to be met during Magnetic Particle Inspections. |
| GM/RT2456 Issue 1 | April 2000 | 1 |
Structural Requirements for Windows and Windscreens on Railway Vehicles This document prescribes the loading cases and impact resistance requirements for windscreens and windows in driving vehicle cabs and for windows in vehicle bodysides, external doors and vehicle interiors. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2462 | April 2001 | 1 |
Internal Combustion Engines in Rail Vehicles This document defines the minimum safety requirements for internal combustion engines operating on Railtrack controlled infrastructure to provide safe operation and interworking. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2466 Issue 1 | June 2003 | 1 |
Railway Wheelsets This document contains mandatory requirements which are to be met during the design of wheelsets and associated components; inspection and testing of railway wheelsets at all stages of manufacture; use, repair and overhaul of railway wheelsets. It also mandates the requirements for a wheelset policy to ensure continued safe use of railway wheelets. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2468 | June 2001 | 1 |
Rail Vehicles - Overall Design, Risk Assessment and Certification This document mandates that all new rail vehicle designs identify all the risks of the whole vehicle design, that those risks are managed and that evidence is available to demonstrate compliance. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2470 | August 2002 | 1 |
Wheelset Supplier Qualification This document mandates audits of wheelset suppliers to ensure their competence. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
| GM/RT2481 | November 2002 | 2 |
Alignment of Train Headlights - Rapid Response This document defines the requirements for the alignment adjustment of specific train headlamps. |
| GM/RT2481 | October 2002 | 1 |
Alignment of Train Headlamps - Rapid Response This document defines the requirements for the alignment adjustment of specific train headlamps. |
| GM/RT2484 | April 2005 | 1 |
Audibility Requirements for Trains This document mandates the warning horn sound pressure levels necessary for all rail vehicles that have driving cabs. There are associated amendment(s), technical notes, briefing notes, non-compliance certificates etc relating to this document. Please click here to view. |
|
Search for:
In:
|